VentBoss® Series

Clean Air Matrix

RoboVent engineers are experts in every category of air filtration and ventilation. The four categories below represent the major options for treating your contaminated air. RoboVent has designed solutions for each of these categories and has manufactured air filtration systems of unrivaled quality.

For more information about these categories, see Indoor Air Quality 101.

Ambient_Filtration

Large blowers and air filtration equipment draw contaminated air from the plant (typically at the ceiling level), filter it and return it to the plant. This is a proven solution in plants welding large parts with overhead cranes. It reduces the haze in the air, resulting in a cleaner working environment, with no negative pressure or heat loss.

SourceCapture_Filtration

Air in the immediate area of the welding activity is captured in a hood system, then filtered and returned to the plant. This is the best solution whenever possible. It allows for a more flexible system and removes the smoke directly from the operator's breathing zone. There are many types of source capture, including overhead hoods, crossflow hoods, fume arms and fume guns, some of which work better than others.

Ambient_Exhaust

Large exhaust fans draw contaminated air from the plant and exhaust it directly into the environment, typically through the roof or walls. This is a traditional method and often results in negative air pressure. Also, it is very difficult to climate-control your plant and the system may not work well in the winter.

SourceCapture_Exhaust
Air in the immediate area of the welding activity is captured in a hood, sent through ductwork, and exhausted directly into the environment. This is a lower capital cost alternative to filtration, but tends to result in high operating costs and large, unsightly ducting systems that work less efficiently with modifications. It also results in negative pressure problems.

Introducing VentBoss® by RoboVent

RoboVent’s decades of experience have led it to build superior air filtration systems for every application. If you need a flexible but powerful solution for dust or fume collection, consider RoboVent’s VentBoss® Series. Historically, applications such as light-duty welding or cutting stations have proven an aggravating challenge; stationary equipment is often too fixed and restrictive, while portable units were ineffective. But times have changed, and RoboVent has changed them. The VentBoss® Series can meet any air quality challenge with a range of flexible solutions.

For a portable solution, the VentBoss® Series 100 offers dust collectors that are powerful, flexible and easy to use. Standard features include compressed-air filter cleaning, built-in spark arrestance and acoustic silencing. A variety of fume arms make these collectors the right solution for many different situations. If a Hi-Vac Extraction unit is what you need, the S710—a Series 700 unit—rolls into place and hooks up to any hose or extraction weld gun you’re using.

Other flexible units in the VentBoss® series include the Series 300 Space Saver Units. These powerful collectors have narrow footprints or even mount on the wall. The Series 200 Plug-n-Play Workstations offer down draft and cross flow tables that require almost no installation time. Other series include even more compact collectors and general ventilation equipment.

The VentBoss® Series was developed to provide tough, durable smoke and dust control equipment for today’s metal fabricators. Equally important is providing this solution at a fair price. As always, RoboVent’s products are the best value in the industry and come with the best warranty available.

For more information, visit ventboss.com

Series 100 : Tough Portables

VentBoss® S110

This is one powerful portable and our most popular unit by far. Super easy to set up and even easier to use! Includes 6" x 10' Fume Arm.

VentBoss® S112

This is one powerful portable and our most popular unit by far. Super easy to set up and even easier to use! Includes 6″ flex hose and cone intake.

VentBoss® S120

Our top of the line portable, with an 8" x 10' Fume Arm. All in one powerful 1200 CFM unit, with on board compressed air tank.

VentBoss® S121

Our top of the line portable, with (2) 6″ x 10′ Fume Arms. All in one powerful 1200 CFM unit, with on board compressed air tank.

VentBoss® S122

Our top of the line portable, with a unique FlexDraft attachment. Change-out from BackDraft to DownDraft in minutes. All in one powerful 1200 CFM unit, with on board compressed air tank.

VentBoss® S130

Catch fumes at the source. Grab this little unit, set it next to your welder and connect it to your tip-extraction welding torch. Or hook up the 2" x 15' flex hose to one of the optional intake attachments.

Series 200 : Plug-N-Play Workstations

VentBoss® S210

Set this Down Draft Table in place and you have a welding or grinding bench ready to go with the convenience of filtration built right in!

VentBoss® S211

Set this 61", double-wide, Down Draft Table in place and you have a welding or grinding bench ready to go with the convenience of filtration built right in!

VentBoss® S220

This all-in-one Cross Flow Weld Booth is the answer to setting up a weld school or training facility in a matter of hours, virtually eliminating installation time and cost. These plug-n-play units stand side to side or back to back to work in any facility layout.

VentBoss® S230

This all-in-one, 2000 CFM Cross Flow Weld Booth is perfect for weld school or training facilities. Includes on-board compressed air tank and an area for welder placement/storage.

Series 300 : Space Saver Units

VentBoss® S310

This floor-mount space saver base unit has the flexibility to hook-up to ductwork, or to be customized to whatever your needs may be.

VentBoss® S311

With 1500 CFM of smoke capturing power, this FloorMount Collector with (1) 8" x 10' Fume Arm is a heavy hitter, easily handling your tough manual welding situations.

VentBoss® S312

With 1500 CFM of smoke capturing power, this FloorMount Collector with (1) 8″ x 14′ Fume Arm is a heavy hitter, easily handling your tough manual welding situations.

VentBoss® S313

With 1500 CFM of smoke capturing power, this FloorMount Collector with dual 6″ x 10′ Fume Arms is a heavy hitter, easily handling your tough manual welding situations.

VentBoss® S314

With 1500 CFM of smoke capturing power, this FloorMount Collector with dual 6″ x 14′ Fume Arms is a heavy hitter, easily handling your tough manual welding situations.

VentBoss® S315

This wall/ceiling-mount space saver base unit has the flexibility to hook-up to ductwork, or to be customized to whatever your needs may be.

VentBoss® S316

With 1500 CFM of smoke capturing power, this wall/ceiling-mount collector with (1) 8″ x 10′ fume arm is a heavy hitter, easily handling your tough manual welding situations.

VentBoss® S317

With 1500 CFM of smoke capturing power, this wall/ceiling-mount collector with (1) 8″ x 14′ fume arm is a heavy hitter, easily handling your tough manual welding situations.

VentBoss® S318

With 1500 CFM of smoke capturing power, this wall/ceiling-mount collector with dual 6″ x 10′ fume arm is a heavy hitter, easily handling your tough manual welding situations.

VentBoss® S319

With 1500 CFM of smoke capturing power, this wall/ceiling-mount collector with dual 6″ x 14′ fume arm is a heavy hitter, easily handling your tough manual welding situations.

VentBoss® S320

Place this floor mount space saver backdraft unit behind your welding area to pull smoke and fume away from the operators breathing zone – the most effective method of filtration.

VentBoss® S321

Mount this unit on a wall or hang it from the ceiling behind your welding area to pull smoke and fume away from the operators breathing zone – the most effective method of filtration.

VentBoss® S350

Position over a weld station for to instantly ventilate a production cell, or incorporate over a larger overhead canopy.

Series 400 : Compact Collectors

VentBoss® S410

2-Filter Cartridge Collector with built-in motor, blower and automatic controls. One connection point for electrical power and compressed air eliminates on-site wiring headaches.

VentBoss® S411

3-Filter Cartridge Collector with built-in motor, blower and automatic controls. One connection point for electrical power and compressed air eliminates on-site wiring headaches.

VentBoss® S412

4-Filter Cartridge Collector with built-in motor, blower and automatic controls. One connection point for electrical power and compressed air eliminates on-site wiring headaches.

VentBoss® S413

6-Filter Cartridge Collector with built-in motor, blower and automatic controls. One connection point for electrical power and compressed air eliminates on-site wiring headaches.

VentBoss® S414

8-Filter Cartridge Collector with built-in motor, blower and automatic controls. One connection point for electrical power and compressed air eliminates on-site wiring headaches.

VentBoss® S415

10-Filter Cartridge Collector with built-in motor, blower and automatic controls. One connection point for electrical power and compressed air eliminates on-site wiring headaches.

Series 600 : Flexible General Ventilation

VentBoss® S610

These compact, plug-n-play Ambient Collectors offer full-plant smoke control. No need for ductwork, takes up very little floor space. Multiple units work together to create a rotating air pattern.

Series 700 : Hi-Vac Extraction

VentBoss® S760

The perfect companion for the VentBoss Extractor™ Fume Gun, this powerful, flexible system is the only portable unit of its size rated for high-production welding environments.

VentBoss® S765 Extractor

Integrated high-performance welding gun with a powerful source extraction system, so fumes are captured as soon as they are generated. When paired with the S760 hi-vac system, the VentBoss S765 Extractor captures 90-95% of weld fumes.