Duct was required to match clients existing installation.
RoboVent successfully provided matching ductwork.
RoboVent met the clients expectations and provided what they needed.
Client is happy with the job.
Existing filtration equipment was not collecting sufficient smoke or shooting sparks.
The ductwork was repaired/replaced by adding a RoboVent Delta3 unit and additional filtration equipment.
The smoke and fumes in the facility was greatly reduced once RoboVent's equipment was installed.
The staff is happy with improved indoor air quality.
There was a Plastic Dust/Fume issue inside the plant.
RoboVent provided a filtration system to filter out the dust and fume.
It resulted in a successful installation to fit within the space required and effectively filter out the dust and fume that was generated by the plastic cutting process.
"We were recommended to use RoboVent by another location of ours and are very happy with the performance of the systems."
The New Shot Blast Machine was not working as well as they wanted it to.
RoboVent installed an outdoor Fusion Series Dust Collector.
The Collector is doing a good job of collecting the dust and keeping the environment clean.
"The collector is sucking the hell out of the dust, and the collector is doing a good job."
Needed new Robotic Welding Cells.
RoboVent installed a Spire System.
The smoke is being captured and minimal floor space is being used.
Everything is working out well.
New Holland, Pennslyvania
Robotic Weld Fumes affecting employee health and plant cleanliness.
RoboVent Spire with streamline hood and curtaining.
Captures 100% of the weld smoke to keep the employees safe and the facility clean.
"We keep using RoboVent because of their commitment to meet our needs. With the Spire, we were able to use minimal floor space and keep our employees safe and our plant spotless"
Bowling Green, KY
Needed a rental unit very quickly.
RV shipped out the rental unit within 2 days of request.
The rental unit performed so well it became a permanent solution.
No complaints on the unit at all.
Cherry Creek, MI
Customer-made sheet metal hoods are costly and difficult to handle.
Streamline hoods provided a modular and customizable solution.
A flexible hood system that made their client happy.
The hoods look good on our robotic system and are very flexible for onsite changes.
Needed to get filtration and cells up and running.
RoboVent rented a unit to get theirs running
The customer was able to start production.
Client was glad that RoboVent helped out to get production running in their facility.
New Holland, Pennslyvania
New Robots needed connected to an existing system.
RoboVent provided hood material and ducting to get the robot cell connected.
The cell was connected successfully.
575 Volt units from another plant in Canada with no spark arrestance.
RoboVent to modify the units.
Customer was able to utilize the existing assets.
Customer was satisfied with the outcome.
Heavy fume/dust issue around process.
Source Capture with hood for containment.
Great capture and a much cleaner shop.
Very happy that we tackled this difficult application and solved the problem.
New area of plant needs temporary welding and ventilation set up within a tight budget.
Use fume guns for the weld process fitted with a flexible Hi-vac extraction system.
Fume guns perfectly suited the manufacturer's process; extracting 80-90% of the fumes for a minimal cost.
Very satisfied with the excellent results; welders are happy about it as well as others working in the immediate area.
Accumulation of dust from shot blast machines.
Install central outdoor Dust Collection system ducted to (10) machines.
Dust is being collected and the work areas are staying clean and well ventilated.
System is working well.
A haze was being produced due to the welding fume in the facility.
Install a RoboVent Floorsaver System.
No smoke escaping the Robot Cell and no haze in the facility.
We have always used the RoboVent Floorsaver systems, and will continue to use them. They save a tremendous amount of floor space.
Robotic Welding cells create heavy smoke and fill the small shop with noxious fumes.
Install Spire collectors to purify the air without taking up space.
Smoke haze is reduced and the smell of oil a memory.
The Spire is great; a small system that fits our layout and does the job!
A new home for the weld line requires an updated filtration system as well.
Install a new, world-class ventilation system using the previous system.
RoboVent outfits the new weld area with an optimized solution.
RoboVent's expertise allowed us to reuse an existing system and save money.
Filtration needed-along with new benches for the weld lab.
Recommend using Crossflow Tables for hands-free fume capture.
A turn-key filtration solution that looks great.
Great product-fits our needs perfectly.
Tarp welding system creates noxious particulate.
Capture fumes with Hi-Vac filtration.
Particulate is handled as soon as it is created.
An innovative solution to solve a problem no one else could.
Spark arrestor requires maintenance.
Install a new, world-class spark arrestor.
Vent system is now equipped with the maintenance-free Delta3 spark arrestance system.
Innovative solution has eliminated a major issue with spark arrestance- ongoing maintenance.
Smoke and weld fume is filling up the room.
Add an ambient filtration system to clean the air.
Another clean room and happy customer, thanks to RoboVent.
RoboVent has the most cost-effective solutions on the market AND great service.
Fume extraction needed on new lines serving different processes.
Install: Spire unit for Robotic Weld Cell; Hi-Vac source capture for Robotic MIG; and Plaser unit for Laser Booth.
World-class environment maintained with each of these systems capturing fumes at the source.
Everything has gone smooth and is working great!
Process automation produces an oily weld smoke.
Design a large, centralized collector equipped with source-capture hoods.
New system eliminates oily smoke at the source with 100% capture.
Excellent capture and great system. Very happy.
Current set up has the wrong voltage and out-of-date spark arrestors.
Upgrade units with new arrestors and 480V.
Client was able to use Delta3 upgrades to save buying a brand-new system.
Happy to be able to use this new system.
Current filtration system poses the potential for risk of fire.
Retrofit the collectors with fire suppression.
All units are now equipped with FM200 fire protection.
Peace of mind knowing that, should a fire occur, it would be stopped before causing any trouble.
Manual weld station has no fume extraction in place.
Install overhead backdraft hood routed to the existing ventilation system.
Weld fumes are extracted along with the rest of the ventilation system.
Customer was satisfied.
Lake Orion, Michigan
MIG robot cell has weld fume escaping.
Perfect application of the RoboVent Spire Collector and optimized ductwork.
Small footprint collector handles fumes for a satisfied customer.
Excellent Service with World-Class Products & Installations.
Robotic weld cell is in need of a hood enclosure - shop aesthetics should be considered.
RoboVent Streamline Hood with curtaining for a perfect fit.
Another satisfied customer with a great-looking, hard-working professional hood.
We only use RoboVent hoods, they just look so much better.
Filtration system needed for Robotic Weld Cell.
Fume extraction mounted on top of the cell with integrated hood.
RoboVent FloorSaver & Hood System gives the best air treatment within the least amount of space.
We love the RoboVent FloorSavers, they help to save tremendously on floor space.
Weld fumes and airborne particles are fouling up the new facility, making it unhealthy.
Whole-shop cleaning with Robovent's Vortex Ambient System.
Shop stays cleaner longer and the employees can breathe easier.
Very happy with the system performance and team morale has picked up considerably!
Robotic welding cell produces heavy amounts of fumes.
Spire Collector is prescribed for maximum effectiveness.
Robotic welding no longer a nuisance since the RoboVent Spire unit collects the fumes.
The client is satisfied with the unit and the price for RoboVent's solution.
Process creates high exposure to manganese fumes.
Install arm source capture system for targeted collection.
Fume capture is excellent and exposure issues are history.
Love the system and how it performs!
Laser welding cell requires filtration.
Outfit the cell ductwork with RoboVent Plaser series collector.
Laser Booth is in perfect working order thanks to clean air.
RoboVent has always been here to get us what we need and we are very confident that their designs and equipment is the best on the market- that's why we keep using them for our projects.
Increase in production requires additional fume capture and spark solutions.
Tag-team the RoboVent Streamline Hood System and Delta3 Spark Arrestor.
Installed industry leading Hood and Spark Arrestor for maximum results.
I like to work with RoboVent, as their hoods are world-class and they have very quick delivery. Their Delta3 Spark Arrestor is the best on the market.
Glen Lyn, Virginia
Employees are complaining about increase in weld fumes making the plant dirty.
Install dual-collection of Ambient and Source Capture to completely eliminate fumes.
Both ambient and source units installed and operating; the weld area is clear.
Works very well, RoboVent has always kept their promises.
Relocation of weld cells requires new ductwork.
New ductwork designed and installed for maximum efficiency.
Cells moved, fumes captured, regulations met.
Professional, well-done job like always.
Laser booth causing smoke fume build up.
High-pressure fume exhaust system to capture the laser fume.
The smoke is effectively being exhausted from the cell.
It seems to be working great!
Process exhaust in atmosphere translates to multiple fires and poor indoor air quality.
Installed Fusion4 with Streamline Hoods and Delta2 intakes.
Reduced exhaust in the plant transforming the facilities indoor air quality.
We are pleased to have found a local company that can look after this project for us.
Large welding cell for aluminum creates a ton of smoke - overhead crane complicates using a normal hood design.
Custom hood solution w/DTS unit.
RoboVent's hood solution allows full crane access. Now the smoke is contained.
Innovative out-of-the-box thinking from RoboVent created a solution that worked.
Robotic Weld Cell, heavy welding with oil might shorten filter life.
DTS and hood installed to enclose the cell with D12 filters for heavy oil applications.
Smoke is contained and filters are running clean.
Good equipment and design - same as always!
MIG Welding Cells working with galvanized steel results in smoke.
Designed multiple solutions to collect the fumes before choosing Spire Collectors on the cells.
Air is clean; free of those obnoxious fumes.
System looks great and is doing an excellent job!
There was a large amount of welding smoke in the facility.
Source Capture Fume Arms w/Ambient Push Pull.
This resulted in clean air and a safe enviroment.
System works great!
Needed a temporary solution until capital was approved.
Tied ducting into an existing system.
They were able to have ventilation on these cells.
Customer was satisfied with the work done.
Needed a new cell ducted to the system so they could run production.
RoboVent completed a late notice weekend install.
Client was able to run production on that cell in time.
Client was satisfied with the work done.
New welding program, needed a solution that was cost effective, easy to install, and could be reconfigured easily.
Installed RoboVent CrossFlow tables.
A compact system that can be easily configured, is maintenance friendly and easy to use.
The product is great, we have them in two of our schools now.
With increased production and more welders, they had outgrown their original system.
Installed a Vortex Unit.
They were able to add to their current filtration system without redoing ductwork, etc., and provide a clean shop for their employees.
The Vortex solution is perfect for a company like ours who is ever growing.
Fear of fires on their filtration equipment.
RoboVent FM200 Fire Suppression Upgrade.
Protection against possible risk of fires.
Its a peace of mind that if for any reason a spark got past the spark arrestor, any fire would be extinguished before it had a chance to do any damage.
They are buying a new ALLtra cutting table and needed an outdoor collector as they are concerned about sparks/fires.
Installed a RoboVent Plaser System and ducted it to an ALLtra cutting system,
Nice installation, works well.
Very happy with the system, asked for some pulsing adjustments which is have been done. Works way better than the Camfil on their welding system.
The exhausting smoke created issues with neighbors, increasing the size of their plasma cutting system, which produces more smoke.
Installed an outdoor Plaser filtration system.
Captures all the smoke from the cutting table and they have had no issues with the system.
No issues, captures all the smoke and fills up barrels regularly.
They had to have fume extraction to meet the hex chrome regulations with a solution that would be able to adapt to plant layout changes.
Installed a Spire Unit.
The system was successfully installed.
Customer is satisfied with the outcome.
Fume/dust from “unwelding” process for repair.
Pro Series w/ 2 arms for fume extraction and operator safety.
Operator is a lot safer and fume/dust from process is removed and collected.
They are happy with the system performance. Initially had some concerns on filter life, but after getting pulsing set up and air pressure set up properly the filters are holding up great!
New robotic welding line coming in with no filtration.
Install outdoor Fusion 3 Series system ducted to the robot cells.
Clean air, low maintenance, quiet operation, and efficient capture of weld fumes.
System is performing well.
Fountain Inn, South Carolina
New robotic welding line coming in with no filtration.
Install outdoor Fusion 3 series system ducted to the robot cells.
Clean air, low maintenance, quiet operation, and efficient capture of weld fumes.
10/10 review on client call, good pricing and product.
Employee complaints, over exposure of weld fume, paying too much for natural gas loss through their MUA/Exhaust system that wasn't keeping up . They didn't know where to start or figure out their current state and how to fix it.
VentMapping - Had tried a couple of things but had systems fail, didn't want to continue with guess work knowing that that this would be a significant investment to fix. They understood that they could see the end result before a solution was installed with a written guarantee!
Accurate results showing them their current state. Also showed them what factors are the biggest contributors in the plant and where at. The robots were determined the biggest contributors followed by the manual welders.
“RoboVent took the guess work out of the equation, they learnt who we are and what we do. They applied the VentMapping Team and tools that are required to show us our current state and provided a solution to go along with it. They were equipment wise so we could plan budget and production wise to implement a solution with the necessary equipment, along with a guarantee that it will work”.
Exhausting smoke outside, wanted to save the heat and also comply with regulations. Also strapped for floor space.
RoboVent FloorSaver collectors.
A solution that allowed them to save their floor space while maintaining compliance with regulations.
“Equipment works great, its quiet and it captures the smoke like we had promised”.
Robot cells with no fume capture.
RoboVent Spire unit.
Captured fumes from one cell with a spire unit.
Client said “has been working well”.
Whitmore Lake, Michigan
Small particulate and fume from a robot deburring application escaping the cell and resulting in a hazardous work area.
Small collectors with hoods and ductwork.
Removing the particulate and fume from the air and keeping the work area safe.
“We enjoy working with RoboVent and the support they provide with their guaranteed solutions.”
Poor indoor air quality and lighting.
Hood source capture over one of four production lines to capture smoke before it disperses into the general ambient shop air. We also installed four Vortex units on a rental trial program as a band-aid for the other three lines.
Excellent results on the hood but the customer was not 100% satisfied with the Vortex temporary option and we are working to improve this.
Client is happy and looking forward to doing the future phases of this project.
Three Rivers, Michigan
Weld fume escaping the robot cell which was making the facility dirty and causing employees to be overexposed.
Spire Collector with a hood and ductwork.
Capturing 100% of the smoke by drawing it away from the employees to keep them safe and their facility clean.
“Love the footprint and size of the Spire collector.”
Short filter life and poor performance on their existing system.
Properly sized and designed RoboVent unit with vertical filters.
Good filter life, effective dust collection, and efficient system.
Received in an email stating, “Would you happen to have another one of those units for sale? This one has worked out nicely for us.”
New line coming in – needed filtration to meet hex chrome levels and was asked to be installed in 4 weeks.
Fusion 3 Equipment with Streamline Hoods.
RoboVent was able to install in 4 weeks in order to get production running when needed.
Client was very happy that we were able to meet the needed install timeline.
They had an older unit at another facility that they weren't using and wanted to hook it up to the robot. The unit was a FloorSaver, but we did a few custom pieces so it could sit next to the robot.
RoboVent came in and retrofitted an existing unit, installed the collector and made sure it was running correctly. In addition, they helped train the team on how to run it. This was a cheaper option than purchasing a new system, and helped to utilize existing resources within the company.
The unit is up and running perfectly and is outperforming the competitions equipment.
Client loved how well the install went, and was extremely impressed with the communication and responsiveness of the sales team. RoboVent is currently working with them on ways to maximize their filter life. They are interested in switching all robot cells over to RoboVent Equipment at the Horicon Facility.
Bad air quality, employee complaints. no filtration at all. make up air and exhaust. expanded indoor operations.
Source capture where they could with hoods and fume arms and Vortex units in areas of the facility that couldn't use source capture due to cranes.
We cleaned the air, created energy savings as the make up air units were no longer needed which eliminated blowing heat outside. happier staff.
Welders on the floor thanked the decision makers for listening to their request and cleaning up the air.
Competitor's dust collector had caught on fire four times
Replaced it with RoboVent equipment with advanced fire suppression and prevention.
No fires, better performance out of the collector.
Client commented on how much better the RoboVent collector is to thier previous equipment.
Lack of maintenance which led to a fire
Replaced the units with new RoboVent units featuring fire suppression and spark arrestance
Reduced risk, advanced energy savings, education on future maintenance requirements.
Impressed with the speed in which we got them back up and running. Reduced downtime.
Equipment constantly ran due to low staff. this impacted the fume into the filter media. automatic on off which scheduled pulsing.
Energy savings through advanced controls.
Getting laser dust coating everything on the floor from their existing dust collection system. High maintenance.
Replaced the collector, eliminated ambient dust and reduced maintenance throughout the facility. Replaced two collectors with one.
Chilliwack, British Columbia
Large Parts couldn't do source capture effectively. Employee Complaints.
Ambient Dust Collection - Vortex - 2 units
Decrease in fume and dust dramatically, increased productivity, no complaints from workers on air quality.