Carbon Panel Air Filters

Clean Air Matrix

RoboVent engineers are experts in every category of air filtration and ventilation. The four categories below represent the major options for treating your contaminated air. RoboVent has designed solutions for each of these categories and has manufactured air filtration systems of unrivaled quality.

For more information about these categories, see Indoor Air Quality 101.

Ambient_Filtration

Large blowers and air filtration equipment draw contaminated air from the plant (typically at the ceiling level), filter it and return it to the plant. This is a proven solution in plants welding large parts with overhead cranes. It reduces the haze in the air, resulting in a cleaner working environment, with no negative pressure or heat loss.

SourceCapture_Filtration

Air in the immediate area of the welding activity is captured in a hood system, then filtered and returned to the plant. This is the best solution whenever possible. It allows for a more flexible system and removes the smoke directly from the operator's breathing zone. There are many types of source capture, including overhead hoods, crossflow hoods, fume arms and fume guns, some of which work better than others.

Ambient_Exhaust

Large exhaust fans draw contaminated air from the plant and exhaust it directly into the environment, typically through the roof or walls. This is a traditional method and often results in negative air pressure. Also, it is very difficult to climate-control your plant and the system may not work well in the winter.

SourceCapture_Exhaust
Air in the immediate area of the welding activity is captured in a hood, sent through ductwork, and exhausted directly into the environment. This is a lower capital cost alternative to filtration, but tends to result in high operating costs and large, unsightly ducting systems that work less efficiently with modifications. It also results in negative pressure problems.

Using a patented process, media for general odor control is loaded with granular activated carbon. Media for the control of light gases is loaded with other types of absorbents, either alone or in combination with granular activated carbon. The result is high-efficiency filtration for a variety of odor control challenges.

OdorGuard® and OdorGuard® Plus Panel filters offer a fast and effective solution. Both product lines are interchangeable with conventional HVAC filters, available for light, medium or heavy duty applications, in standard and specials sizes, and 1″ and 2″ thickness. OdorGuard ® filters utilize 60% granular activated carbon for general odor removal. OdorGuard® Plus contain equal volumes of 60% granular activated carbon and activated alumina impregnated with 5% potassium permanganate to remove odors and light gasses.

Types of Panel Filters We Offer:

  • Die Cut Panels
  • Ring Panels

 

Get a Filter Quote