Cube & V-Pocket Filters

Clean Air Matrix

RoboVent engineers are experts in every category of air filtration and ventilation. The four categories below represent the major options for treating your contaminated air. RoboVent has designed solutions for each of these categories and has manufactured air filtration systems of unrivaled quality.

For more information about these categories, see Indoor Air Quality 101.

Ambient_Filtration

Large blowers and air filtration equipment draw contaminated air from the plant (typically at the ceiling level), filter it and return it to the plant. This is a proven solution in plants welding large parts with overhead cranes. It reduces the haze in the air, resulting in a cleaner working environment, with no negative pressure or heat loss.

SourceCapture_Filtration

Air in the immediate area of the welding activity is captured in a hood system, then filtered and returned to the plant. This is the best solution whenever possible. It allows for a more flexible system and removes the smoke directly from the operator's breathing zone. There are many types of source capture, including overhead hoods, crossflow hoods, fume arms and fume guns, some of which work better than others.

Ambient_Exhaust

Large exhaust fans draw contaminated air from the plant and exhaust it directly into the environment, typically through the roof or walls. This is a traditional method and often results in negative air pressure. Also, it is very difficult to climate-control your plant and the system may not work well in the winter.

SourceCapture_Exhaust
Air in the immediate area of the welding activity is captured in a hood, sent through ductwork, and exhausted directly into the environment. This is a lower capital cost alternative to filtration, but tends to result in high operating costs and large, unsightly ducting systems that work less efficiently with modifications. It also results in negative pressure problems.

Pocket filters offer a great combination of low pressure drop, availability of high MERV and a low price. These are commonly found in traditional fixed speed fan systems, as the full airflow is necessary to completely fill the pockets with air to achieve maximum performance.

We provide flexibility in the media selection and pocket design of each style filter. This gives you the ability to select a low air resistant pre filter, standalone durable high dirt holding capacity filter, or a filter treated with an antimicrobial agent.

Types of Cube and V-Pocket Filters:

  • Series 140 MERV 7 Three Ply Wet Tack
  • Series 430 1-Ply Dry
  • Series 440 MERV 8 Two Ply PBT32 Tack
  • Series 440HC MERV 8 Two Ply PBT32 Tack
  • Series 63 1Ply Dry Tack

 

Get a Filter Quote