M11 PleatLock Premium Air Filter

Clean Air Matrix

RoboVent engineers are experts in every category of air filtration and ventilation. The four categories below represent the major options for treating your contaminated air. RoboVent has designed solutions for each of these categories and has manufactured air filtration systems of unrivaled quality.

For more information about these categories, see Indoor Air Quality 101.

Ambient_Filtration

Large blowers and air filtration equipment draw contaminated air from the plant (typically at the ceiling level), filter it and return it to the plant. This is a proven solution in plants welding large parts with overhead cranes. It reduces the haze in the air, resulting in a cleaner working environment, with no negative pressure or heat loss.

SourceCapture_Filtration

Air in the immediate area of the welding activity is captured in a hood system, then filtered and returned to the plant. This is the best solution whenever possible. It allows for a more flexible system and removes the smoke directly from the operator's breathing zone. There are many types of source capture, including overhead hoods, crossflow hoods, fume arms and fume guns, some of which work better than others.

Ambient_Exhaust

Large exhaust fans draw contaminated air from the plant and exhaust it directly into the environment, typically through the roof or walls. This is a traditional method and often results in negative air pressure. Also, it is very difficult to climate-control your plant and the system may not work well in the winter.

SourceCapture_Exhaust
Air in the immediate area of the welding activity is captured in a hood, sent through ductwork, and exhausted directly into the environment. This is a lower capital cost alternative to filtration, but tends to result in high operating costs and large, unsightly ducting systems that work less efficiently with modifications. It also results in negative pressure problems.

Economy Cartridge Air Filter

M11 PleatLock filter media is a proprietary cellulose polyester blended and a popular selection for standard dust and fume applications.

RoboVent’s new PleatLock technology has been engineered to outlast even the toughest competitor filter. With added dimples within the pleats, there is up to 35% more media space to capture more particulate, allowing for longer time between filter changes. This saves time and money!

  • Cellulose/polyester blend media
  • Good filtration for minimum cost
  • 95% Maximum humidity
  • 225 °F / 107 °C Max operating temperature
  • MERV 11*

Applications:

  • Ambient Dust
  • Blasting
  • General Industrial
  • Nuisance Dust
  • Weld Smoke
  • Other Light Loading Dust

 

* Note: MERV estimated on clean filter only. Assumes this is minimum.

Model NumberMedia Area
(ft2)
End Cap
Configuration
SF Size
(in)
OD
(in)
ID
(in)
Length
(in)
PL-10D12-M11-C68OPEN/CLOSEDNA10.38612
PL-12D26-M11205OPEN/OPENNA12.758.3826
PL-12D36-M11-C284OPEN/CLOSEDNA12.758.3836
PL-14D26-M11233OPEN/OPENNA13.889.526
PL-14D26-M11-C233OPEN/CLOSEDNA13.889.526
PL-14D26-M11-SF233SQUARE/CLOSED16x1613.889.526
PL-14D36-M11322OPEN/OPENNA13.889.536
PL-14D36-M11-C322OPEN/CLOSEDNA13.889.536
PL-14D36-M11-SF322SQUARE/CLOSED16x1613.889.536
PL-14D52-M11-SF465SQUARE/CLOSED16x1613.889.552
PL-18D16-M11190OPEN/OPENNA17.3812.6316
PL-18D12-M11-C190OPEN/CLOSEDNA17.3812.6312
PL-22D12-M11202OPEN/OPENNA22.3817.8812
PL-22D14-M11-C236OPEN/CLOSEDNA22.3817.8814
PL-22D36-M11606OPEN/OPENNA22.3817.8836
PL-14D52-M11-SF465SQUARE/CLOSED17x1813.889.552
PL-22D21-M11353OPEN/OPENNA22.3817.8821