Extractor300 Consumables

Clean Air Matrix

RoboVent engineers are experts in every category of air filtration and ventilation. The four categories below represent the major options for treating your contaminated air. RoboVent has designed solutions for each of these categories and has manufactured air filtration systems of unrivaled quality.

For more information about these categories, see Indoor Air Quality 101.

Ambient_Filtration

Large blowers and air filtration equipment draw contaminated air from the plant (typically at the ceiling level), filter it and return it to the plant. This is a proven solution in plants welding large parts with overhead cranes. It reduces the haze in the air, resulting in a cleaner working environment, with no negative pressure or heat loss.

SourceCapture_Filtration

Air in the immediate area of the welding activity is captured in a hood system, then filtered and returned to the plant. This is the best solution whenever possible. It allows for a more flexible system and removes the smoke directly from the operator's breathing zone. There are many types of source capture, including overhead hoods, crossflow hoods, fume arms and fume guns, some of which work better than others.

Ambient_Exhaust

Large exhaust fans draw contaminated air from the plant and exhaust it directly into the environment, typically through the roof or walls. This is a traditional method and often results in negative air pressure. Also, it is very difficult to climate-control your plant and the system may not work well in the winter.

SourceCapture_Exhaust
Air in the immediate area of the welding activity is captured in a hood, sent through ductwork, and exhausted directly into the environment. This is a lower capital cost alternative to filtration, but tends to result in high operating costs and large, unsightly ducting systems that work less efficiently with modifications. It also results in negative pressure problems.

Consumables for every application.

We have a full range of fume gun consumables for every welding application, from stainless steel to aluminum. Use genuine RoboVent replacement parts to ensure the best performance from your fume gun. 

  • Contact Tips
  • Nozzles
  • Liners

Nozzles

The Extractor300 is available with a threaded 14mm Conical Nozzle.

A) 14mm Conical – For heavier-thickness, high-current and high-deposition butt- and lap-joint applications, this nozzle offers greater shielding gas coverage to help prevent porosity.

ItemPart NumberDescriptionPack Qty
AEXG-NCE-140-SCREW14mm Threaded Conical Nozzle (35/64")2

Contact Tips

Extractor Contact Tips

Part NumberDescriptionPack Qty
EXG-CT-030Standard Contact Tip .030" (.8mm)25
EXG-CT-035Standard Contact Tip .035" (.9mm)25
EXG-CT-040Standard Contact Tip .040" (1mm)25
EXG-CT-045Standard Contact Tip .045" (1.2mm)25
EXG-CT-052Standard Contact Tip .052" (1.4mm)25
EXG-CT-062Standard Contact Tip .062" (1/16")(1.6mm)25
EXG-CT-AL-035Aluminum Contact Tip .035" (.9mm)25
EXG-CT-AL-040Aluminum Contact Tip .040" (1mm)25
EXG-CT-AL-045Aluminum Contact Tip .045" (1.2mm)25
EXG-CT-AL-052Aluminum Contact Tip .052" (1.4mm)25
EXG-CT-AL-062Aluminum Contact Tip .062" (1/16") (1.6mm)25
EXG-CT-CU-035Tri Metal Contact Tip .035" (.9mm)25
EXG-CT-CU-040Tri Metal Contact Tip .040" (1mm)25
EXG-CT-CU-045Tri Metal Contact Tip .045" (1.2mm)25
EXG-CT-CU-052Tri Metal Contact Tip .052" (1.4mm)25
EXG-CT-CU-062Tri Metal Contact Tip .062" (1/16") (1.6mm)25
EXG-CT-CU-078Tri Metal Contact Tip .078" (5/64")(2mm)25
EXG-CT-CU-095Tri Metal Contact Tip .095" (3/32")(2.4mm)25

Liners

Extractor Liners

Part NumberDescriptionPack Qty
EXG-RL-3Red 3M Liner for .035"-.045" wire1
EXG-RL-4Red 4M Liner for .035"-.045" wire1
EXG-RL-5Red 5M Liner for .035"-.045" wire1
EXG-RL-6Red 6M Liner for .035"-.045" wire1
EXG-YL-3Yellow 3M Liner for .052"-.062" wire1
EXG-YL-4Yellow 4M Liner for .052"-.062" wire1
EXG-YL-5Yellow 5M Liner for .052"-.062" wire1
EXG-YL-6Yellow 6M Liner for .052"-.062" wire1
EXG-BL-3Black 3M Liner for .052"-.095" wire1
EXG-BL-4Black 4M Liner for .052"-.095" wire1
EXG-BL-5Black 5M Liner for .052"-.095" wire1
EXG-BL-6Black 6M Liner for .052"-.095" wire1
EXG-BL-ALU-3Black 3M Liner for Aluminum wire1
EXG-BL-ALU-4Black 4M Liner for Aluminum wire1
EXG-BL-ALU-5Black 5M Liner for Aluminum wire1
EXG-BL-ALU-6Black 6M Liner for Aluminum wire1

Maintenance Tools

Extractor Maintenance Tools

ItemPart NumberDescriptionPack Qty
AEXG-TSTool Set (Cleaning Brush and Wrench)1
BEXG-GSGas Meter1
CEXG-AFMAir Flow Meter1
DEXG-CBCleaning Brush1