Industrial Replacement Filters

Clean Air Matrix

RoboVent engineers are experts in every category of air filtration and ventilation. The four categories below represent the major options for treating your contaminated air. RoboVent has designed solutions for each of these categories and has manufactured air filtration systems of unrivaled quality.

For more information about these categories, see Indoor Air Quality 101.


Large blowers and air filtration equipment draw contaminated air from the plant (typically at the ceiling level), filter it and return it to the plant. This is a proven solution in plants welding large parts with overhead cranes. It reduces the haze in the air, resulting in a cleaner working environment, with no negative pressure or heat loss.


Air in the immediate area of the welding activity is captured in a hood system, then filtered and returned to the plant. This is the best solution whenever possible. It allows for a more flexible system and removes the smoke directly from the operator's breathing zone. There are many types of source capture, including overhead hoods, crossflow hoods, fume arms and fume guns, some of which work better than others.


Large exhaust fans draw contaminated air from the plant and exhaust it directly into the environment, typically through the roof or walls. This is a traditional method and often results in negative air pressure. Also, it is very difficult to climate-control your plant and the system may not work well in the winter.

Air in the immediate area of the welding activity is captured in a hood, sent through ductwork, and exhausted directly into the environment. This is a lower capital cost alternative to filtration, but tends to result in high operating costs and large, unsightly ducting systems that work less efficiently with modifications. It also results in negative pressure problems.

Stocked and Ready

Do you need filters for your industrial processes? No problem. No matter what kind of equipment you have installed, we can help you keep it humming. We maintain a large inventory of high-quality replacement filters for nearly every application and brand of equipment. Our ClientCare team can help you find the right filters to keep your equipment running at optimal performance, no matter who made it.

For a complete inventory of available aftermarket filters, or for help finding filters for uncommon applications, contact your RoboVent ClientCare representative.

Here are some of the filters we commonly keep in stock:



Air Filters

  • Framed Fiberglass and Polyester Disposable Panels
  • Pleated Filters Merv 7-Merv 11
  • Polyester Roll Media, Pads, Ring Panels, & Links
  • Polyester Cubes
  • Synthetic and Fiberglass Media Bag Filters
  • Rigid Cell Filters
  • Minipleated and Minipleat V-Cells
  • HEPA and ULPA Box Filters
  • Carbon-Bulk Carbon and Impregnated Media


Spray Booth Filters

  • Spray Booth Filters for All Booth Makes & Models
  • Prefilter Bags, Cubes and Polyester Link/Ring Panels
  • Ceiling/Intake Blankets and Ring Panels
  • Exhaust Filter Roll Media and Cut Pads-Polyester & Fiberglass
  • 2nd Stage Exhaust Cube and Bag Filters


Dust Collection Filters

  • Replacement Cartridge and Bag Filters for All Dust Collection Systems
  • Full Range of Specialty Medias for All Application Requirements
  • Full Range of Filters for Oil Mist Collection: Metal Mesh, High Efficiency Bags and HEPA Filters.


Compressed Air Filtration

  • Complete Line of Compressor and Compressed Air Filter Elements for all Major Brands
  • Compressor Spin-On Lube Filters, Air Intake Cartridges and Panels and Air/Oil Separators
  • Refrigerated and Desiccant Dryers