Spire360™ Series

Clean Air Matrix

RoboVent engineers are experts in every category of air filtration and ventilation. The four categories below represent the major options for treating your contaminated air. RoboVent has designed solutions for each of these categories and has manufactured air filtration systems of unrivaled quality.

For more information about these categories, see Indoor Air Quality 101.


Large blowers and air filtration equipment draw contaminated air from the plant (typically at the ceiling level), filter it and return it to the plant. This is a proven solution in plants welding large parts with overhead cranes. It reduces the haze in the air, resulting in a cleaner working environment, with no negative pressure or heat loss.


Air in the immediate area of the welding activity is captured in a hood system, then filtered and returned to the plant. This is the best solution whenever possible. It allows for a more flexible system and removes the smoke directly from the operator's breathing zone. There are many types of source capture, including overhead hoods, crossflow hoods, fume arms and fume guns, some of which work better than others.


Large exhaust fans draw contaminated air from the plant and exhaust it directly into the environment, typically through the roof or walls. This is a traditional method and often results in negative air pressure. Also, it is very difficult to climate-control your plant and the system may not work well in the winter.

Air in the immediate area of the welding activity is captured in a hood, sent through ductwork, and exhausted directly into the environment. This is a lower capital cost alternative to filtration, but tends to result in high operating costs and large, unsightly ducting systems that work less efficiently with modifications. It also results in negative pressure problems.

Powerful ambient filtration with the smallest footprint in the industry.

Looking for easier way to clear the air? Spire360 provides effective ambient filtration for manufacturing facilities, without expensive and complicated ductwork. Just set them up on the facility floor and go!

With its exceptionally small footprint (about the same as a wire barrel), Spire360 won’t take up much floor space. They are easy to install and easy to move as your facility configuration changes. Everything is easily accessible for fast filter changes and maintenance, no special tools required. Altogether, it’s the fastest, most flexible and easiest way to add ambient filtration to your facility.

Spire360 features:

  • Small footprint: Our floor-saving design takes up about the same amount of space as a wire barrel. And since there is no ductwork to install, it’s less intrusive and won’t interfere with overhead cranes or production equipment.
  • Energy Efficiency: Filtering and recycling factory air keeps heated or cooled air in and lowers overall energy and operating costs.
  • Regulatory Compliance: Ambient filtration does a better job of clearing contaminants from the air than traditional ventilation, resulting in higher employee comfort and better compliance with health and safety regulations. Since contaminants are removed rather than simply blown out the facility, it will also ensure compliance with tightening emissions regulations and future Acceptable Point of Impingement Concentration limits.
  • Easy Install: Spire360 is faster and easier to install than traditional ducted systems for displacement ventilation or ambient filtration. Since the Spire units have a very small footprint, it's easy to find space for them.
  • Very Low Maintenance: Everything is easily accessible for fast filter changes and maintenance—no special tools required.
  • Flexibility: Whenever you need to change your floor configuration, Spire360 is easy to move right along with your production equipment.

How it Works

ADeflector Plates Deflector Plates within the top of the dust cabinet which protect filters from particulate abrasion, creates a high-velocity airstream around the filters to bring more dust into the containment chamber.

BPulsing System Pulse nozzles are engineered to create high level shock wave through the entire filter dislodging dust from the filter pleats sending the captured dust to the dust holding bin.

CPleatLock Filters RoboVent’s PleatLock technology has been engineered to outlast even the toughest competitor filter. With added dimples within the pleats, there is up to 35% more media space to capture more particulate, allowing for longer time between filter changes. This saves time and money!

DSimplR Controls The new 7” full-color, HMI Control Panel is easy to see, easy to use and easy to understand while helping to keep the system running smoothly and operators informed. The Control Panel is mounted in the electrical control box which can be installed on the side of the unit or tethered to where it is more convenient.

EeDrive™ Automatic VFD – Option The eDrive constantly monitors airflow and automatically adjusts the motor RPM to compensate for filter loading. Energy peaks and valleys are evened out and energy usage is cut by 20% to 30%, while filter life is extended by as much as 30%.

FSafeSensor™ Particulate Monitoring SafeSensor is the Spire’s advanced particulate-monitoring device that can detect leaks past the filters. If one should occur, SafeSensor will shut the equipment down and trigger an alarm.

GSupprex200 Fire Suppression System (option) This is a dual-stage system activated by smoke or heat. If smoke is detected, a fire damper closes, stopping all airflow and oxygen supply. If heat is detected, FM-200 gas is instantly deployed.

HDust Containment More dust containment (15 gallons) – which means less servicing and better performance of the unit with more consistent CFM & Static pressure. Simply pull out the drawer and dispose of the dust.

SimplR Controls

This extra-large 7” full-color Human Machine Interface (HMI) is easy to see, easy to understand and gives you access to everything you need to keep your system running smoothly. You can control the pulse timing and trigger points, set filter service alarms, setup automatic run schedules, operate and control the blower speed, monitor filter pressure and see operation events all with the simple push of a couple of buttons.


Spire 360 | Configuration

Easy to Move, Plug & Play

These units can be moved and re-configured easily throughout the plant. Without the hassle of ductwork, the Spire360 can be placed in high-dust and fume producing areas or placed strategically throughout the facility based on the airflow patterns. The small footprint allows the unit to be placed near columns or other tight spaces so long as the vertical space is available.

VentMapping® Engineering Design Services

Take the guesswork out of your clean air initiative

Your facility is unique. To get the best results, your whole-plant ventilation system needs to be personalized to your individual environment. That requires a thorough understanding of your facility layout, fume-generating applications, airflow patterns and physical constraints.

VentMapping is a systematic engineering and design service that uses a holistic approach to optimize your air quality system. Our comprehensive approach helps us find the safest, most effective and most efficient way to meet your goals.

Standard Features

Control Panel

An easy-to-use touch-screen control panel that allows you to manage your RoboVent collector from a single screen.


SafeSensor™ Particulate Monitoring

An advanced particulate-monitoring device capable of detecting leaks past the filters. If one should occur, SafeSensor shuts the system down and triggers an alarm.

Air Filtration Systems

All-in-One Complete Air Filtration Systems

RoboVent collectors arrive completely assembled and tested. This all-in-one approach delivers the highest quality, convenience and cost savings.

Rugged Cabinet Design

RoboVent's dust collectors are housed in a rugged, modular cabinet that is covered—along with structural components—by a 15-year warranty.

Built-in Noise Reduction

Multiple measures contribute to noise reduction in RoboVent dust collectors, improving the work environment and helping to meet noise regulations.

The RoboVent “No Weak Links” Process

From state-of-the-art filters and cabinet design to our ironclad guarantee on every system we sell, RoboVent provides an unbroken chain with no weak links for total customer satisfaction.

60 Minute On-Site Assembly

RoboVent collectors come pre-assembled, so on-site assembly takes less than 60 minutes!

24-Hour Support

RoboVent's 24-hour support—at 888.RoboVent—is a promise that a RoboVent expert is available at all times for any need.


RoboVent promises every customer will be satisfied, and that promise is in writing. RoboVent's warranty is the best in the industry.

Optional Features


Supprex-200™ Fire Suppression

Activated by smoke or heat, the Supprex-200 acts quickly to suppress a fire. Airflow is shut off, and, if needed, FM-200 gas is deployed. Cleanup is minimal.

Supprex-200™ Damper

A device that stops the spread of fire and smoke through your ductwork, RoboVent's Supprex200 Damper protects your workers and property.

eDrive™ Automatic VFD

Constantly monitoring airflow, the eDrive automatically changes motor RPM to adjust for filter loading. This significantly cuts energy use and extends filter life.

AutoSaver™ Power Usage Sensor

Mounted directly into your control panel, the AutoSaver feature turns your RoboVent system on during welding and off when finished, cutting energy costs.

Service Platform

A secure place to stand while changing filters, the Service Platform provides a safe and convenient way to tend to your dust collector's maintenance.

Sprinkler Head Port

An economical tool in RoboVent's fire suppression arsenal, the Sprinkler Head Port is mounted directly into the filter cabinet for immediate action.

Hi-Vac Industrial Cleaning System

An option providing centralized dust collection, RoboVent's Hi-Vac Industrial Cleaning System connects all of your dust collectors to a central vacuum and a single container.

RoboVent Maintenance Program, Clean Air and Industrial Air Filtration Solutions

ClientCare Maintenance Program

ClientCare lets you leverage RoboVent's expertise so you can reduce the burden on your maintenance staff and stay focused on your core business.